A Tribute to Everett David Richards Sr. - Tire Review Magazine

A Tribute to Everett David Richards Sr.

Everett David Richards Sr. was called home to be with the Lord, July 4, 2017, at age 87. Everett was one of the last original Bandag franchise dealers still living.

Everett David Richards Sr. was called home to be with the Lord, July 4, 2017, at age 87.

Everett was one of the last original Bandag franchise dealers still living.

Born in Doddridge County–Oxford, W.V., he was the middle child of seven and the son of a woodcutter. Work ethics were instilled at an early age for if you didn’t work, you wouldn’t eat. His family raised everything, but sugar and flour, and what they shot they ate.

Everett left home to join the Marines at age 17, but after completing boot camp he was discovered to be underage and was discharged. He went back home for a while and at the age of 20 met Joy Ann Collins and eventually eloped to Maryland and was married in 1950. Everett eventually moved to Massillon, Ohio, like so many others, to work in the steel mills up north.

He was drafted in the Army in 1951 and spent 18 months in Korea as a forward observer.

After an honorable discharge in 1953 as sergeant, he went back to the mills and soon started a family.

In 1957, my dad found out about union strikes and in his case lasted several months. To create some income dad started refurbishing bicycles and made them look like new, pin stripping and all, but that wasn’t enough. Living on apples and soda crackers and behind in their rent his neighbor, Jim Costas asked Everett if he knew anything about tires. My dad said, “No, but I will learn.” That was the beginning of what would be a life time experience and knowledge of tires.

He soon started at S & S Tire in Barberton, Ohio, and started out learning how to change semi tires. Back then they were all tube type, mostly 20” and a few 22”s. He eventually was subbed out to work at Dixie Ohio Express (DOX) which was across the street from Goodyear. Goodyear would use DOX as a test facility because of its size and locality. The work he would do was back breaking: changing and repairing 12 to 24 tires per day and monitoring tests for Goodyear.

One day four unusual retread tires were given him to put on a trailer to run for test. Dad noticed that the retread rubber was only on the top of the tire and not molded over the shoulders as he was accustom to seeing. He had told me he put them on a trailer going west and it didn’t make Mansfield, Ohio, before one of tires peeled. He made the service call out to change the tire and brought it back. The mate also peeled near Dayton, Ohio, but that service was done near there. The thing that caught my dad’s attention the most were the other two for they stayed on and outperformed anything else he had ever put on including new tires.

Shortly afterwards my dad was at S & S tire and overheard a conversation between the owners and a gentleman that was trying to interest them in the very retread that my dad had tested at DOX. He had heard the name Bandag for the first time. At the time S & S had their own hot, mold cure system which was prevalent at that time and they would not be interested in another, untried, new process. My father later contacted that gentleman and was very interested in starting up a shop, but had very little capital to do so.

The salesman was Harry Beam. The best I can remember him as built like Colonel Sanders, of Country Fried Chicken fame. He was quite the salesman, very outgoing and passionate of the product. I always had a liking of him and had never met anyone like him or ever since, excluding my father.

Everett found two others to partner with and at $1,000.00 each the four started Bandag of Akron in 1959. At that time there was only the “hot box and stainless steel bands” method to cure. This was before the pressure chamber and envelope days. The buffer was a German manufactured, Tru- arc of the type used by the German originator, Bernard A. Nowak.

Of the two other partners one was an investor friend, Vilas Marsh, also of West Virginia, and a working partner Chris Christianson. Chris worked in the shop with the retreading and some sales, Harry with help in sales and my dad with sales and service. As you may imagine it was rough going in those times. “Bandag, never heard of it” was many a comment to overcome, but slowly and with much perseverance a small customer base began, some industrial solids, but mostly single owner and coal bucket trucks. My father cherished each customer because he knew there were other places his customers could do business with, but my dad earned their trust and they knew he was honest with them at all times and when failures happened he always made it right and was very responsive. The Bandag product began to earn a good reputation for its long wearing capabilities and slowly the word spread.

It was early 1962 and a financial crisis occurred with the business and forced its closure. My father strongly believed in the Bandag product and found another financial backer in Carlton B. Coen and in June of 1962, with $ 7,200.00, franchised Canton Bandag Co. in Canton, Ohio.   At this time the pressure curing chamber and envelopes was a major upgrade to the retreading process. He held on to all the older pieces of equipment some of which is still used today.

I started early (at the age of eight) working (trying to help) with my dad. Every morning he would roll all the tires out of the small AMOCO gas station to make room for the retreading process. It was then I would “help” to paint the tires with black tire paint with a 4” brush before delivery.

Dad had advertized that he would cap any size tire and eventually was taken to court over this claim by one of the major tire makers. It was agreed upon in court, that three tires would be supplied to my dad for retreading by the complainant. One tire was a 4.10/3.50-4, another was a 6.00-6 airplane tire and the last was a 6.00-23 Studebaker tire. Dad was given one week to return with the tires retreaded. The big guys thought they had him. I have the tires still today as a constant reminder you need only believe and trust in the Lord. Dad never backed down when he was in the right.

Dad would work many a nights either emptying the chamber or installing the tires on a truck. Sometimes I would go with him and hold the flashlight so he could finish the job removing, dismounting, remounting, inflation and reinstall. As I soon would experience, very hard work. Remember these are still tube type tires with lock rings. I was taught the safe and correct way of disassembly, inspection, cleaning and reassembly of these wheels from my dad. Later, as I grew bigger, we would work well together for we knew what had to be done next without saying a word.

By the time I was twelve I would swing the “duck bill” tire hammer though I never mastered standing on the tire while it was upon the stand and take the ride down when the tire gave way like my dad could.

Dad eventually purchased back the interest of Canton Bandag Co. and was soon told he needed to move, for in a few years Route 30 was coming through, so in 1968 he move the business location to 6245 Cleveland Ave. S, near East Sparta, in a building just built off the road in the strip mines. We rented there for 33 years. During those years my mom would even help in the retreading (the guys would carry the tires for her from buffer to building station). She eventually settled to doing the office bookwork which she did till her death in 1996. All the family at one time or another had worked at retreading. The youngest, Kim actually retreaded tires for about a year. My younger brother, Dan was with us three years and eventually was called into the Lord’s ministry. My sister, Rebecca has taken on the roll our mom had and now is assisted by my wife, Candy.

Canton Bandag Co. moved to its new facility of 24,000 sq. ft. in June of 2000, where dad had designed and built a buffer that can do larger tires. Now we have expanded into newer markets such as the only manufacturer of solid antique rubber tires in North America, VIS semi-truck aluminum wheel polishing and specializing in industrial retreading of solid rubber tires, foam-filled tires as well as pneumatic.

Dad had come in every day as his health permitted and had stopped coming in just before Thanksgiving of 2014. We would always have lunch together. I really missed him then. He was a real trooper and accepted his health challenges with COPD and being in the care facilities that he eventually was committed to.

I Timothy 6:12 “Fight the good fight of faith, lay hold eternal life, whereunto thou art called, and hast professed a good profession before many witnesses.”

A faith in Christ that all the family enjoys today.

Our customers and the family all miss you, God Bless you Dad. Dave Richards Jr.

You May Also Like

Continental appoints new ‘head of region’ for the US, Canada

In this role, Rob Schroeder will oversee all of material handling, port, earthmoving and agriculture tire business in the United States and Canada.

Conti-RobSchroeder_HeadofRegion

Continental revealed that Rob Schroeder, former Sr. manager of operations, marketing and analytics, will take over the responsibility of head of region for the United States and Canada. In this role, he will oversee all of material handling, port, earthmoving and agriculture tire business in the United States and Canada. The appointment took effect April 1.

K&M Tire adds Jon Zurcher as executive vice president

Zurcher previously served as COO for Best-One Tire for the past seven years.

John-Z-K&M
Hercules Tire reveals spring rebate on five tire lines

From now until May 15, customers who purchase four qualifying Hercules Tires may be eligible to receive up to a $70 rebate.

hercules-spring-us-rebate
Kenda Tires becomes Cleveland Cavaliers associate partner for NBA playoff games

The tire manufacturer will be advertised on the court, with Kenda-branded rally towels, and will appear during local pre-game programming.

Kenda-Tire-Sir-CC-High-Fives-1400
Nokian Tyres releases 2023 sustainability report

Highlights of the company’s sustainability actions in 2023 include a commitment to achieve science-based net-zero emissions by 2050.

Nokian-Tyres-sustainability-report

Other Posts

Giti Tire announces winners of STEAM competition

New this year, the winning teams from each division will progress to compete out of state.

Giti-STEAM-Winners
Nexen Tire to be the official tire partner of the San Diego Padres

Nexen Tire will be featured on a variety of marketing assets, including billboards and in-ballpark branding at Petco Park.

Nexen-Tire-Padres
WGH to recall up to 520,000 Terrain Attack, Terrain Pro winter tires

The tires are labeled as snow tires, but do not have sufficient traction to perform in all snow weather conditions, according to the National Highway Traffic Safety Administration.

Recall
K&R Tire Center to host grand opening of new Flint, MI location

The company said it will have representatives from Goodyear, local customers and dealership representatives on hand to celebrate.

KR-Tire-center