You searched for Ken-Tool - Tire Review Magazine
Ken-Tool
Ken-Tool Hires National Sales Manager 

Ben Graham has joined Ken-Tool as the company’s national sales manager.

Ken-Tool Launches Rust Hog Abrasive Tool

Ken-Tool releases the new Rust Hog abrasive tool to remove surface rust and debris on studs and flat mating surfaces of wheels, wheel hubs and brake rotor hats.

Ken-Tool Releases Earthmover Inflation Cage

Ken-Tool has released its largest tire inflation safety cage – the Model T112 12-bar Earthmover Inflation Cage. This single-piece cage is designed for the inflation of large earthmoving, mining and agricultural tires, Ken-Tool said. The T112 12-bar Earthmover Inflation Cage is made with steel—precision mandrel bent, very-high strength 12 guage, 2.25-inch diameter structural steel tubes.

Ken-Tool Names Director of Sales & Marketing

Ken-Tool has promoted Stephen Vyn to director of sales and marketing. Vyn has been a member of the Ken-Tool sales and marketing team for three years and recently worked as interim sales manager. “Steve has proven himself to be a dedicated and focused member of the Ken-Tool management team,” said Doug Romstadt, Ken-Tool president. “In

Ken-Tool Unveils Three New Tools

Ken-Tool has released three new tools to make adjusting drum air brake linkage to remove dangerous slack on trucks and trailers an easier task, the company said. The tools – the Meritor Automatic Slack Adjuster Set, Haldex Slack Adjuster Tool and Bendix Slack Adjuster Tool – fit each brake manufacturer’s respective air braking systems. The

Ken-Tool Adds 5-Piece MorTorq Socket Tool Set

Ken-Tool said its latest fastener socket driver set, the 30260 5-piece MorTorq driver set, includes a 3/8-in. driver and M0, M1, M2, M3 and M4 drive heads, in addition to a steel storage rail. The fastener design, often referred to as a “spiral drive,” with the driver engaging into the four curved “wings” in the

Ken-Tool Launches New Socket Tool Set

Ken-Tool has launched a new fastener socket driver set designed for use on MorTorq fasteners – the 30260 5-piece MorTorq socket tool set. The fastener’s “spiral drive” design and the driver engage into the four curved “wings” in the faster head allows the driver head to have complete contact with the fastener’s recessed drive head,

Ken-Tool Releases Dual Wheel Separation Bag

Ken-Tool has unveiled a tool to help remove wheels/tires from truck and trailer axles—the Ken-Tool 34555 Shark Fin Dual Wheel Separation Bag. The Shark Fin is an extreme-duty, rubber coated, Kevlar bag which uses air pressure to create 5000 lbs. of force to separate and remove stuck/corroded dual wheels off the axle studs and hubs.

Ken-Tool Releases DIY Consumer Kit

Ken-Tool, a tire and wheel service product supplier, announced the launch of the DIY reCore TPMS Valve Stem Repair Kit. The kit allows consumers a do-it-yourself approach to repair damaged aluminum TPMS valve stems, Ken-Tool said. The kit includes two repair stems, a custom stepped drill bit, a tap, tap holder, a valve core torque